Sikkens Cetol Door And Window Sanding Before Final Coat

Clean tools with mineral spirits.

Sikkens cetol door and window sanding before final coat. Let surface dry a minimum of 24 hours. Old damaged coatings must be completely removed before application of cetol door window. Apply 3rd coat of cetol door window 7. Apply final coat and reattach hardware photo by kit latham.

Clean tools with mineral spirits. Let surface dry for minimum of 24 hours 6. Brush on the second coat following the same order and let it dry overnight. Do not apply cetol door window over other coatings.

Let surface dry for minimum of 24 hours 4. Apply second coat of cetol door window 5. Dries to touch in approximately 12 hours. After sanding the door it was refinished with a base coat of sikkens cetol 1.

Apply a third coat of cetol i. Re sanding may be necessary. Clean tools with paint thinner or mineral spirits maintenance procedures proper maintenance starts with visual inspection. Coat all sides of door.

Wait 7 days before using furniture. This process was repeated once more before applying the final coat of. Let surface dry for minimum of 24 hours 6. A more resilient alternative to exterior varnishes and polyurethanes.

Working with cetol door window application do s apply when the surface and air temperature is 50 f 10 c to 95 f 35 c stir well before using do not apply in direct sunlight saturate all end grains nail holes and cracks in the wood. Let surface dry a minimum of 24 hours. Then the door was lightly sanded and cleaned again before applying a coat of sikkens cetol 23. Sikkens proluxe cetol door and window is a premium translucent exterior stain whose alkyd high solids formulation offers optimum protection and a distinctive look for these unique areas.

Apply a third coat of door window wood finish. It is always recommended to perform a three 3 coat color and sheen test sample of the wood. Application do s for cetol i and cetol 23 plus apply when the surface and air temperature is 50 f 10 c to 95 f 35 c stir before using saturate all end grains nail holes cavities and. In order to restore this home s front door to its original condition our team at monk s completely stripped the door and sanded it to the bare wood.

The best method to prepare vertical wood surfaces is to sand with 80 120 grit sandpaper. Apply 2nd coat of cetol door window 5. Apply in the direction of the grain. Available as a clear satin clear gloss or 4 ready mix colors in satin.

After the finish has dried overnight gently hand sand it with 220 grit paper. However an alternate to sanding for preparation is listed below. You don t want to sand through to bare wood dust the door and wipe it down with a tack cloth. Working with cetol door window preparation procedures new weathered uncoated wood sand door and window surfaces with 80 120 grit sandpaper prior to application of cetol door window.

Application do s apply when the surface and air temperature is 50 f 10 c to 95 f 35 c stir well before using saturate all end grains nail holes and cracks in the wood. Dries to recoat in 24 hours additional coat may increase these times. Apply third coat of cetol door window 7.